CAT5 RX - Receiver

* Cable length equalizer for long
  distances
* Video continuity LEDs to ensure
  all signals are transmitting
* IR port

Video
Nominal Input Level: 1 Volt peak to peak
Gain: 1 Volt into 75 ohms (2 Volts unterminated)
Input Impedance (CAT5 TX): 75 ohms
Output Impedance (CAT5 RX): 75 ohms
Isolation port to port: > 65 dB
Isolation out to input: > 80 dB
Return loss: > 30 dB
Video bandwidth: > 50 MHz (HDTV requires 37 MHz min.)
Distance: 300 feet @ 1080i (500 feet with CAT6 cable)
3 composite video signals may be substituted on
the individual component video inputs
(1000 Ft. max).

Audio (Analog)
Nominal Input level: 1 Volt peak to peak
Gain: Unity (slightly reduced at max cable length)
Input Impedance: 22k ohm
Output Impedance: 1k ohm
Frequency Response: 20 Hz to 20 KHz
Signal to Noise: 80 dB @ 1 Volts out
Audio (Digital)
Supports standard SPDIF digital audio

Power
Requirement: External 9 or 10 Volt AC @ 600 mA with a
(2.1 mm center) Coaxial connector.
NOTE: Composite video may be used for security or
with standard monitors